120W endoscope light source module

Medical endoscopes use ordinary halogen lamps, xenon lamps are only a few hundred hours of life, the need to often replace the bulb, and our LED endoscope module service life of up to 60,000 hours;

2, according to the characteristics of single-core LED cold light source, design high-efficiency optical system, LED endoscope module brightness increased by more than 30%.

3, good uniformity: LED endoscope module light source irradiation area no bright spot no dark area, uniform and soft light.

4, single-channel LED, driving current 25A, to ensure that the LED light source is bright enough, there are more than 5000LM luminous flux, optical fiber illuminance value of more than 2 million lux (different optical fibers will have different test results),

5, heat dissipation system, we ensure the normal use of LED to reduce the cost as far as possible, a simple way to achieve good results. In our design of the cooling system - the use of efficient thermal media, to ensure the service life. Consultation 189-0285-6607..

6, according to the characteristics of imported single-chip LED light source chip, special design of high-performance constant current source, perfect solution to the problem of low voltage and high current, thanks to the chip manufacturer - Lumenus to assist our company to develop and provide relevant technical information; LED endoscope dimming energy range: 0%-100% linear dimming. At present, there are two kinds of knob dimming and key dimming;

Split thermal control protection of endoscope module, independent monitoring of key components, especially the protection of key parts in LEDL chip and circuit board; Small size, due to the use of LED single chip, currently the most ideal electrical light source.

Schematic diagram of LED endoscope module: (switching power supply, 12VC-LED constant current control board (knob and digital), LED, radiator, optical fiber connector and condenser lens, with several control lines.)